FiberForce materials range is constantly growing.
Dimensional tolerance close to excellence guarantees exceptional performance and reliability.

NYLFORCE CARBON

Filament composed by a tough nylon reinforced with a high content of carbon fibres, it’s perfect for precise and stable prints of objects that need to resist to high-temperatures, strains and impacts.
Despite being engineering grade and abrasive material, it is easy to print with the most common desktop printers. It is a special professional material unique in its kind.

PRINTING SETUP

Suggested printing temperature:
250-265°C


Suggested printing speed:
40 mm/s


Suggested bed temperature:
60-70°C


Download Datasheet

NYLFORCE GLASS

Filament composed by nylon charged with glass fibres, allows precise prints and it’s a great choice for technical and mechanical purposes. It has a noticeable tensile strenght and stiffness, over a very high impact strength.
Despite being engineering grade and abrasive material, it is easy to print with the most common desktop printers.

PRINTING SETUP

Suggested printing temperature:
250-265°C


Suggested printing speed:
40 mm/s


Suggested bed temperature:
60-70°C


Download Datasheet

MURANO PA-GF

Murano PA-GF is the name of a small island in the Venetian lagoon, which in the past held the world monopoly of excellent glassmaking for several centuries. Murano PA-GF is the formulation 2.0 of our well known Nylforce Glass Fiber, implemented by our engineers. This formulation, indeed increased % of real glass fiber infused and heat resistance.

Available on multiple colors (also customized and exclusive).

PRINTING SETUP

Suggested printing temperature:
250-265°C


Suggested printing speed:
40 mm/s


Suggested bed temperature:
60-70°C


Download Datasheet

NYLON CUBE

“Nylforce Cube” is an easy-to-print nylon grade.  Taking advantage of nylon’s strength, flexibility, and durability, technicians use this 3D printing filament to create tools, functional prototypes, or mechanical parts.

Printable at low temperature (240/245°C) it’s optimized to avoid the use of a heated chamber.

PRINTING SETUP

Suggested printing temperature:
240-250°C


Suggested printing speed:
30-50 mm/s


Suggested bed temperature:
70°C  (not necessary)


Download Datasheet

PET

Engineering grade polyester PET compound, showing superior bed adhesion, excellent at bridging as well as retraction, and keeping printed parts clean without any need of post-processing.

It features  higher mechanical strength and printing precision than any kind of ABS, but prints as easy as PLA.

FiberForce provides an wide range of PET colors continuously extending.

PRINTING SETUP

Suggested printing temperature:
200-220°C (392-428 °F)


Suggested printing speed:
30 – 100 mm/s


Suggested bed temperature:
40-50°C (104-122 °F)


Download Datasheet

ABS PRO

ABS PRO is a premium filament that features low warping, excellent surface finishing, and allows very tight dimensional tolerances.

Available in several colors.

Its special formulation falls down bad smells and it is adopt both by makers to professional users.

PRINTING SETUP

Suggested printing temperature:
245-265°C


Suggested printing speed:
40-70 mm/s


Suggested bed temperature:
90-110°C


Download Datasheet

SMART ABS

SMART ABS is a professional ABS based material, super performing in a large-spectrum of applications.

Provides benefits such as high heat resistance and direct printing on heated glass or printed surface.

It is the best experience when you use support materials. 3 key words defines it perfectly: TRUSTY – FRIENDLY – EFFICIENT.

PRINTING SETUP

Suggested printing temperature:
240-250°C


Suggested printing speed:
40-80mm/s


Suggested bed temperature:
90-110°C


Download Datasheet

PLA PRO HT

PLA PRO HT is a professional grade PLA compound.

Once post annealed (110°C in oven for 20 minutes) it reaches superior mechanical and temperature resistance and temperature resistance.

This material brings the user to have much higher performances when compared to ABS, but printing as easy as common PLA.

PRINTING SETUP

Suggested printing temperature:
190-220°C


Suggested printing speed:
40-85 mm/s


Suggested bed temperature:
30-50°C (not necessary)


Download Datasheet

CONDUCTIVE

It’s a biopolymer compound,  based on CarbonNanoTubes (CNT) technology. So far, it’s indeed the most conductive material available on the market (4 times less resistive than our competitors’).

10cm length of a 1.75mm filament shows a resistance of 0.75 kohm. A post printing crystallization through annealing makes it achieve a 100 °C of resistivity.

PRINTING SETUP

Suggested printing temperature:
215°C


Suggested printing speed:
40-85 mm/s


Suggested bed temperature:

30-50°C (not necessary)


Download Datasheet

PC-ABS

PC-ABS is a high-impact engineering thermoplastic ideal for functional prototyping, tooling and manufacturing.  Commonly found in automotive, electronics, and telecommunications applications, it is one of the most widely used industrial thermoplastics in the world. It combining the strength and heat resistance of polycarbonate with the flexibility of ABS.

Printing Setup

Suggested printing temperature:
240-260°C


Suggested printing speed:
30-60mm/s


Suggested bed temperature:
100-110°C


Download Datasheet

GHOSTFORCE

Ghostforce is a revolutionary hydrosoluble support material.  It’s not moisture-sensitive, allowing very long prints without any issue (basic PVA causes hydrolysis after short time printing).

It’s compatible with the most common technical polymers, including our nylon based Nylforce Carbon Fiber and Glass Fiber

Printing Setup

Suggested printing temperature:
200-220°C


Suggested printing speed:
40-70 mm/s


Suggested bed temperature:
Not required


Download data sheet